About
Profile
Equipment
Honor
Service
Project
Performance of dust collectors in the fabric (electric) bag project
Performance of electrostatic precipitator (export part)
Products
Dust-removing equipment
Electrostatic precipitator bag filter accessories
News
Company News
Industry News
Contact
中文
+86-0575-87052128
Performance differences between cartridge dust collectors and bag dust collectors
Different filter materials: The filter materials for bag filters often include polyester, aramid, polypropylene, etc; The commonly used materials for filter cartridge dust collectors include polyester fibers, nanofibers, etc.
16
2023
/
06
Types and working principles of industrial dust removal equipment
There are three types of mechanical dust removal equipment, namely gravity dust collector, cyclone dust collector, and inertia dust collector.
Is the insulation layer of the bag filter necessary?
Bag dust collectors belong to dry dust collectors. If the operating temperature is lower than the dew point, they will condense into liquid water. The liquid water and dust will mix and cover the surface of the filter screen to form a paste bag, and the filter screen of the bag dust collector will be blocked. When the air temperature is below - tens of degrees Celsius, the smoke on the edge of the shell is easily condensed into water droplets. At the same time, the operating temperature of the bag filter must be above the acid frost point temperature by 25K, and the flue gas temperature must always be maintained above 150 ° C to effectively prevent frost formation. Therefore, the insulation layer of the bag filter is very necessary.
What is the reason for the malfunction and smoke of dust removal equipment during use
Generally speaking, there are two situations where smoke and dust from the outlet of industrial dust removal equipment occur. One is the continuous occurrence of smoke and dust, that is, due to the long-term aging and severe damage of the cardboard box, the upper and lower hanging openings of the cardboard box are not tight, or the continuous gap between the hanging openings of the cardboard box and the cardboard box is not tight, resulting in dust leakage. The second is instantaneous smoke, which is caused by damage to the cloth bag, but it is not serious. A nozzle that emits smoke instantly appears in the cloth bag.
Cathode Line Characteristics
Lead antimony alloy cathode wire is not only suitable for sulfuric acid production from pyrite, but also for various smelting flue gas acid production.
Working principle of Electrostatic precipitator
The basic principle of an electrostatic precipitator is to use electricity to capture dust in the flue gas, which mainly includes the following four interrelated physical processes: (1) gas ionization. (2) The charging of dust. (3) Charged dust moves towards the electrode. (4) Capture of charged dust.
What are the maintenance procedures for bag filters?
No matter what bag dust removal equipment it is, regardless of its quality, if it is not regularly maintained and cleaned, it will still be eroded and eliminated, and even have an impact on our personal health. What are the daily maintenance procedures? Let's take a look together.
Four major factors affecting the filtration efficiency of bag filters
At the beginning of purifying dusty gases with filter media, there is no dust layer on the filter media, and the ability to capture dust is relatively low; When the dust layer is formed, it has a good trapping effect on the dust.