2023

What is the reason for the malfunction and smoke of dust removal equipment during use

Generally speaking, there are two situations where smoke and dust from the outlet of industrial dust removal equipment occur. One is the continuous occurrence of smoke and dust, that is, due to the long-term aging and severe damage of the cardboard box, the upper and lower hanging openings of the cardboard box are not tight, or the continuous gap between the hanging openings of the cardboard box and the cardboard box is not tight, resulting in dust leakage. The second is instantaneous smoke, which is caused by damage to the cloth bag, but it is not serious. A nozzle that emits smoke instantly appears in the cloth bag.
Explain the correct solution to smoke from industrial dust removal equipment bags. When most of the bags are found to be damaged, they must be replaced completely. After replacing the bags, immediately stop working. At this point, turn off the pulse controller, open the top hole door, remove the cloth bag, remove the cloth bag, remove the cloth bag, make the spring ring on the upper mouth of the cloth bag concave, pull the cloth bag up and out, and remove dust from the flower board hole before installing a new cloth bag.
Find out the cause of bag spray of industrial dust removal equipment, and judge the place where bag spray can be excluded according to the corresponding quantity of spray at the blowing outlet when working with Electromagnetic pulse valve and pulse controller. Remove the cloth bag and use a flashlight to find dust leakage from the observation hole of the upper box, or open the bag to open the pulse controller. When spray, find which venturi tube has smoke and dust, that is, remove the dust leakage from the cloth bag. Handle according to the problems that occur. After most of the cloth bags are damaged, they must be replaced completely. After replacing the cloth bag, the bag stops working. At this point, turn off the pulse controller, open the top hole door, remove the cloth bag, and after removing the cloth bag, take out the cloth bag. Depress the spring coil on the upper mouth of the cloth bag and pull it out upwards. Before installing a new cloth bag, please remove the dust from the flower board hole.

Last

Is the insulation layer of the bag filter necessary?

Cathode Line Characteristics

Last

Is the insulation layer of the bag filter necessary?

Cathode Line Characteristics

Related information